20 alpha road chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order online at www.hittite.com instrumentation product support at te@hittite.com HMC-T2240 synthesized signal generator, 10 mhz to 40 ghz
9 - 2 20 alpha road chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order online at www.hittite.com instrumentation product support at te@hittite.com synthesized signal generator 9 HMC-T2240 synthesized signal generator, 10 mhz to 40 ghz v01.0710 the HMC-T2240 is an easy to implement test equipment solution designed to ful ll your signal generation needs. built on a foundation of high quality and market leading hittite mmics, the HMC-T2240 provides the highest output power, lowest harmonic levels and broadest frequency range amongst signal generators of its size and cost. this compact and lightweight signal generator also features usb, gpib and ethernet interfaces ensuring carefree integration within va rious test environments while improving overall productivity and equipment utilization. applications ? ate ? test & measurement ? r&d laboratories advantages ? versatile: higher drive simpli es test set-ups ? efficient: 500 s frequency switching ? reliable: incorporates hittite mmics ? flexible: manual or software control via usb, gpib or ethernet performance ? high output power: +29 dbm @ 1 ghz ? wide frequency range: 10 mhz to 40 ghz ? excellent phase noise performance: -96 dbc/hz @ 10 khz offset @ 10 ghz ? spurious rejection: -65 dbc @ 10 ghz ? power resolution: 0.1 db ? frequency resolution: 1 hz wide frequency range, 10 mhz to 40 ghz signal generator!
9 - 3 20 alpha road chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order online at www.hittite.com instrumentation product support at te@hittite.com synthesized signal generator 9 HMC-T2240 synthesized signal generator, 10 mhz to 40 ghz v01.0710 output power range @ 25 c 0 5 10 15 20 25 30 35 40 0 4 8 1216202428323640 output power (dbm) frequency (ghz) frequency accuracy: as per internal ref. 2 ppm resolution: 1 hz internal reference: 10 mhz aging rate: <1 ppm/yr external reference input: 10 mhz (sine) internal reference output: 10 mhz (square wave) spurious @ 10 dbm output < -60 dbc @ integer frequencies < -45 dbc @ fractional frequencies ssb phase noise vs. frequency -160 -140 -120 -100 -80 -60 -40 -20 0 1e+1 1e+2 1e+3 1e+4 1e+5 1e+6 1e+7 10 mhz 1 ghz 5 ghz 10 ghz 15 ghz 20 ghz 25 ghz 30 ghz 40 ghz ssb phase noise (dbc/hz) frequency offset (hz) harmonics ssb phase noise (dbc/hz) frequency (ghz) 2nd harmonics (dbc) 3rd harmonics (dbc) 0.01 -20 -36 0.05 -36 -41 0.1 -21 -31 0.5 -27 -38 1-30-49 2-30-52 5-38-56 10 -29 -55 15 -27 -44 20 -42 - 25 -26 - output power = +10 dbm frequency (ghz) power output (dbm) 0.01 26 0.1 29 0.5 29 129 528 10 26 15 25 20 21 25 20 30 22 35 21 40 20 frequency (ghz) offset from carrier 10 hz 100 hz 1 khz 10 khz 100 khz 1 mhz 10 mhz 0.01 -79 -89 -100 -106 -102 -126 -140 0.10 -88 -95 -103 -110 -104 -128 -140 0.50 -85 -93 -117 -122 -120 -135 -136 1 -87 -89 -111 -116 -114 -134 -146 5-72-75-96-102-98-123-145 10 -61 -64 -90 -96 -92 -117 -142 15 -60 -62 -87 -92 -90 -110 -133 20 -51 -60 -84 -90 -86 -111 -136 25 -55 -63 -78 -83 -82 -99 -126 30 -53 -65 -82 -87 -85 -105 -120 40 -50 -59 -78 -84 -81 -105 -126 output noise: floor < -155 dbc/hz above data is typical performance at +25c after 30 minutes of warm-up time unless otherwise stated. output power (maximum leveled) minimum settable: -40 dbm dynamic range: >60 db resolution: 0.1 db power accuracy: 1 db for leveled outputs
9 - 4 20 alpha road chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order online at www.hittite.com instrumentation product support at te@hittite.com synthesized signal generator 9 HMC-T2240 synthesized signal generator, 10 mhz to 40 ghz v01.0710 two tone third order int ercept test set-up efficient mixer conversion loss, isolation & mxn spurious test set-up spectrum analyzer dut lo if rf rfin i/o control device under test ? ampli ers ? mixers & converters ? modulators ? rfics & subsystems HMC-T2240 HMC-T2240 HMC-T2240 lo rf if spectrum analyzer dut rfin i/o control device under test ? single or double-balanced mixers ? up/down converters ? i/q mixers HMC-T2240 HMC-T2240 power - ac : 100 to 240 vac @ 50 to 60 hz calibration : 1 year environment (for indoor use only): 0 to 35 c cooling : 2 internal fans input / output : 10 mhz refout [1] 10 mhz refin [2] trigger in [3] : ttl trigger out [3] : ttl rs-232 (used for eld upgrades) ethernet gpib usb 1.1/2.0 rf output 2.92mm female mechanical vibration & shock : mil-std 810 table 415.5 c-vii mil-std 202 mtd 214 1.5g compliance [4] : csa & ce general mechanical characteristics h: 76.2 mm (3 in) w: 203 mm (8 in) d: 305 mm (12 in) weight 3.2 kg (7 lbs) warranty : 1 year parts and labor general speci cations [1] +10 dbm typ. into 50 ohms; bnc connector [2] -5 dbm min. 50 ohms; bnc connector [3] the trigger input can be driven from either 3.3v or 5v sources for direct interface with ttl signal levels; bnc connector [4] testing in process
9 - 5 20 alpha road chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order online at www.hittite.com instrumentation product support at te@hittite.com synthesized signal generator 9 HMC-T2240 synthesized signal generator, 10 mhz to 40 ghz v01.0710 HMC-T2240 rear panel i/o connections connectivity & control its compact size, light weight, fast switching speed and usb, gbip and ethernet control interfaces support the standard scpi command set ensuring smooth integration within all test environments, particularly those associated with automated test. an installation disk that accompanies each unit includes all the drivers required to remotely control the device as well as a user friendly gui interface (right) compatible with a windows xp ? , windows 7 ? or windows vista ? operating system. user control is facilitated via pull down menus that allow program- ming of single or swept modes in frequency or power. integra- tion of multiple units within a production test environment is easy, and affordable. remote interface hardware : usb (windows xp ? , windows 7 ? , windows vista ? drivers supplied), gpib or ethernet software : labview 2009 driver frequency switching speed : 500 us typ. local interface front panel rotary knob & display windows ? - windows xp ? , windows 7 ? and windows vista ? are registered trademarks of microsoft corporation.
9 - 6 20 alpha road chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order online at www.hittite.com instrumentation product support at te@hittite.com synthesized signal generator 9 HMC-T2240 synthesized signal generator, 10 mhz to 40 ghz v01.0710 ordering information HMC-T2240 power cord all pricing is in u.s. dollars and is subject to change without notice. model number description price HMC-T2240 synthesized signal generator 10 mhz to 40 ghz $19,498.00 includes 100 - 240v ac power supply and one power cord at no cost. please specify your preferred power cord part number at time of ordering. (see optional power cord table) part number region hmc-pc01 continental europe hmc-pc02 united kingdom hmc-pc03 china hmc-pc04 australia, new zealand hmc-pc05 north america hmc-pc06 south africa / india hmc-pc07 switzerland hmc-pc08 denmark hmc-pc09 israel hmc-pc10 italy hmc-pc11 japan part number description price hmc-rm02 dual rack mounting plate 19 2u chassis $385.00 test rack mount kit
|
